Witura WT-211 Bedienungsanleitung PDF herunterladen (Seite 4)

WT-211 GSM/GPRS Wireless Modem

______________________________________

WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.com

Figure 4

Select the PC’s serial port that has connected to wireless modem, such as “COM1”. Press “OK” to enter

port settings. The following dialogue box should appear.

Figure 5

Select baud rate (i.e., Bits per second) for wireless Modem is 115200 with data byte of 8 and stop byte

of 1 as shown in Figure 5. Press “OK” and the main interface of HyperTerminal appears.

Note: please make sure PC’s serial port has not been engrossed by other application. If it has been,

please close the application or select the other serial port.

2. Test connection of serial port and Wireless Modem. Input AT command “at” and press “Enter” if

“OK” is responded then the connection is ok. Otherwise, reset the connection as the above process

Figure 6

1 2 3 4 5 6 7 8 9 ... 15 16

Keine Kommentare

Witura WT-211 Bedienungsanleitung Seite 4