Witura WT-9001 IP65 Bedienungsanleitung PDF herunterladen (Seite 16)

WT-9001 IP65 GSM Remote Control And Alarm System

WT-9001 IP65 – USER MANUAL – Rev. 3.4 – Technical Support: technical@witura.com

The Input Alert Message can be edited and programmed up to 100 characters long. You

can change the displayed text by sending the following commands by SMS message to

the unit. Note: Only support normal abc/ABC English text, no special characters.

Text Command:

*STR[N]#XXXXX…

N stands for number 1 - 8 of Input

XXXXX… stands for the display text that you want to program

Example:

If you want the alert message to display “Garage Opened!” when input 1 triggered;

you would send the following SMS message to the unit.

*STR1#Garage Opened!

The Input Alert Message can be edited and programmed up to 100 characters long. You

can change the displayed text by sending the following commands by SMS message to

the unit. Note: Only support normal abc/ABC English text, no special characters.

Text Command:

*STO[N]#XXXXX…

N stands for number 1 - 8 of Input

XXXXX… stands for the display text that you want to program

Example:

If you want the alert message to display “Garage Closed!” when input 1 triggered; you

would send the following SMS message to the unit.

*STO1#Garage Closed!

An alert message will be sent when the increment of alarm counter reaches the alert

value (Default: 500). It is possible to set the alert value up to maximum value of

65535 times. To set the counter alert value of input, you can send the following

commands by SMS message to the unit.

5.4.3 Editing the Input Alert Message For (When Input gets High Pulse)

5.4.4 Editing the Input Alert Message For (When Input returned to Normal)

5.4.5 Setting the Counter Alert Value For Inputs

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Keine Kommentare

Witura WT-9001 IP65 Bedienungsanleitung Seite 16