Witura WT9002 Bedienungsanleitung PDF herunterladen (Seite 17)

WT-9002 IP65 User Manual

WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

After enter password… (Another short beep ~ Password Correct)

Press *3# (you should hear a short beep ~ success)

Continue press 1# to change the first administrator number (another short beep ~

success)

Then enter the new administrator number 4444444444# (you will hear a short beep

and the number has been changed to 4444444444

Continue...

Press *3# (you should hear a short beep ~ success)

Continue press 2# to change the second administrator number (another short beep ~

success)

Then enter the new administrator number 5555555555# (you will hear a short beep

and the number has been changed to 5555555555

Continue...

Press *3# (you should hear a short beep ~ success)

Continue press 3# to change the third administrator number (another short beep ~

success)

Then enter the new administrator number 6666666666# (you will hear a short beep

and the number has been changed to 6666666666

If at any time the unit responds with 3 beeps then the number change has been

unsuccessful and you must recall the unit and try again!

It is possible to change any of the administrator numbers by sending a SMS command to

the unit assuming the following 3 numbers are to be changed as.

Example:

Change TEL1 to 4444444444

Change TEL2 to 5555555555

Change TEL3 to 6666666666

4.8 CHANGING THE ADMINISTRATOR NUMBERS VIA SMS

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 46 47

Keine Kommentare

Witura WT9002 Bedienungsanleitung Seite 17