Witura WT9002 Bedienungsanleitung PDF herunterladen (Seite 8)

WT-9002 IP65 User Manual

WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Only Register User Can Open the Gate – Up to 1,000 authorized users

When one of the 1,000 register users call to the WT 9002, the system will recognized

the caller ID number (phone number) and open the gate automatically.

Put Up A Simple Alarm System While You Not At Home

The system have 2 input can connect to the motion sensor, magnetic door sensor or

smoke, gas & glass break sensors. If any intruder or emergency happen, the WT

9002 units will SMS up to 3 telephone number.

Open The Gate Use Your Mobile Phone While You Not At Home

If any visitor in front of your gate and you still not at home, you can open the gate

to the visitor by pressing the 6 digit password at your mobile phone and the gate will

open to allow the visitor come into the house.

Remote Control to Switch On/Off Lighting, Air Conditional and Any Electrical

Appliances

The System has 2 Outputs and you can call in to switch on / off the electrical

appliances. For example to switch on the Air Conditional before you enter into the

house.

Backup battery to Prevent Power Failure - You House Will Keep Monitoring

When Power failure

WT 9002 has a rechargeable battery that powers the system for minimum of 8 hours

in the even of a power failure. The battery system will continue to use your utility

power until power failure is detected. Once power failure is detected, the battery

backup will instantaneously begin to supply and once utility power is restored, the

backup will automatically switch off.

Use With Any door bell or Intercom System

WT 9002 will supply together with doorbell. If you prefer other design, you can

choose to let the WT 9002 to work with any other Intercom system or doorbell. Just

simply connect the 4 wires from WT 9002 to the other manufacturer doorbell system,

it will work well.

PC Programming

WT 9002 has a DB9 connector that can be used for PC programming. Just simply

plug in the provided RS232 cable to the DB9 port and the other end to your

computer. By using the provided setting software, you are now able to program the

unit easily.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 46 47

Keine Kommentare

Witura WT9002 Bedienungsanleitung Seite 8