Witura WT-9001 IP65 Bedienungsanleitung PDF herunterladen (Seite 29)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

To link the WT-9001 unit to the monitoring software, you will need to program the

connection type, external IP address of the host computer and Port number created

from the monitoring software into the WT-9001 unit by sending the following SMS

command.

Text Command:

*GSIP#TTT,XXX.XXX.XXX.XXX,NNNN

TTT stands connection type “TCP”

XXX.XXX.XXX.XXX stands for Public IP Address

NNNN stands for Local Port number created from the WT_9001 Monitoring Software

Example:

Assume that you have acquired the External IP address as 123.65.214.231, port

number 8765 and connection type: TCP, you would send the following SMS command

to the unit.

*GSIP#TCP,123.65.214.231,8765

To check GPRS communication settings, you can send *GSIP?#

To activate the GPRS connection of the SIM card, you can send the following SMS

command the unit. Default: Off

Text Command:

*GPRS#X

X stands for ON (1) or OFF (0)

Example:

To turn on GPRS connection, you would send the following SMS command to the unit.

*GPRS#1

Note: It is advised that you should program all other functions before enabling the

GPRS connection. When enabled, it will not send any SMS messages.

To check GPRS connection setting, you can send *GPRS?#

5.6.3 Setup the GPRS Communication

5.6.4 Turn On the GPRS Connection

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Witura WT-9001 IP65 Bedienungsanleitung Seite 29